|
Re: upper cam rubber seal rubber plugs
<<You could just unplug the 6 injectors and crank the engine a bit. The only problem doing it this way is that you are moving the internals while priming. It's not the best method, but I did it a similar way and did not have any issues.>>
i dont know of any other way to get oil around the engine without moving the oil pump huh? pull the ignitor plug and save yourself from pulling an extra 5 wires. or if you can fit your hand down there, pull the cranks sensor plug.
__________________
Liberalism is a disease. When you can stare at facts and ignore them anyway, you have it.
|