|
Re: upper cam rubber seal rubber plugs
You could just unplug the 6 injectors and crank the engine a bit. The only problem doing it this way is that you are moving the internals while priming. It's not the best method, but I did it a similar way and did not have any issues.
__________________
Cam
'92 Ls-L Dark Teal
11:1 CR ECUTUNE pistons
ECUTUNE .256 duration intake/exhaust cams
ECUTUNE STAGE 2AV1 ECU
Z32 MAF/SR20DET injectors
Balanced & Blueprinted
|