[msvx95]

Here's a quick how-to for checking codes...you don't have to start the vehicle or have it run.

The "Check Engine Light" indicates transmission codes. Long blinks = 10, short blinks = 1. In other words, two long and two short blinks is a code 22. One long and one short is code 11.

The following self diagnosis will show any fault codes for the engine:
Remove the kick panel just beside the left foot rest on the driver's side.
Locate blue wires.
Locate black connector (smaller of the 2 black ones). Hold it notch up.
With ignition off, insert one of the wires into top row, 2nd pin from left.
Turn key to on position, but do not start the car.
Count the blinks from check engine light on dashboard.