Re: Brake pipes
I did cut the line, and had to use vice grips to get the fitting out. Replaced the line and tried to start all the bolts on the rear cross member, after several hours (two days work for me) their all started and tightened down. The only thing to do is bleed the brakes and it be back on the road again.
Thanks for all the help/info and support.
Michael 
__________________
_______________
92svxman & Freida the co-pilot.
First 92 Claret(flat color,IMHO)
Two 92 Teal(much nicer color)
5 Speed pending, from 93 Legacy Turbo
4.11 Tranny/rear diff. May go for 3.90
Claret 145K
Underdrive Pulley from Newbies2005
New timing belt
new radiator
new water pump
new timing belt cover
New headlights and harness
Replaced exhaust (with stock) 
Life on the road who could ask for more
|