08-22-2010, 06:21 AM
|
 |
Thread Killah
|
|
Join Date: Feb 2001
Location: Greenville, SC
Posts: 5,835
|
|
|
Re: SVX crumpled by a Jeep bumper, how bad?
Quote:
Originally Posted by Manarius
I had a dent deeper than that and it was only about $400 to get it pulled, sanded, and repainted. I don't know what you guys are talking about...totaling the car over a small thing like that. Okay, the regulator, and other window junk is another 200 and labor. Up the estimate for the body work to $500 and it's still under $1000.
With that damage there, they're going to get a dent puller that puts small rivets in the panel to pull it out. Then, they'll putty the crap out of it, sand it down, and put a couple coats of paint and clearcoat on there. There's no metal that is severely creased and putty could be used to fill the rest of the small divots.
|
+1 That'll buff right out. Doesn't look to bad at all.
__________________
Matt
Locker Link
2015 BRZ Limited 6MT
92 Ebony LS-L ECUtune Stage2av1, Z32 MAF, 370cc injectors, TomsSVX intake, BontragerWorks 22mm RSB #003, HID Hi and Lo beams, OT endlink and bushing mods, PWR Aluminum radiator, Harvey's QC shift kit, 2.5" flowmaster 80 exhaust, 17" Michelin Pilot Sport A/S, Poly sway bar bushings, Slotted Bradi rotors, AFBeefcake powdercoated calipers, 97 grill, and a huge set of air horns. 300,000 miles and counting
92 Ebony LS-L. ecutune stage1v4, motorsport 1pc pulley. Garage Queen - sold to Dad in upstate NY 155,000 miles
19 Subaru Ascent Premium - -Hers !.
89 DL 4x4 little red wagon - a.k.a. The immortal suby. 275k R.I.P.
|