Re: STeeL's built motor/turbo build
Quote:
Originally Posted by TomsSVX
what response info are you looking for...
It won't be too bad setting up the MS w/ the position sensors... Just run a std 24 tooth wheel setup with an aux trigger for cam position.
Tom
|
Thought you might try to use all the OEM sensors, but sounds like you'd just go with all the aftermarket sensors that people typically use with the MS.
__________________
Mychailo
:: 2006 Silver Mitsubishi Evolution 9, E85, 34 psi peak, 425wtq/505whp DJ ::
1995 Laguna Blue SVX L AWD 5MT (sold)
Visit my locker
SVX Mods: ND iridium spark plugs, Impreza RS fpr, afr tuned to 13.2:1 using a custom MAF bypass, custom exhaust, WRX 5MT w/ STi RA 1st-4th gear & stock WRX 5th gear, Exedy 13 lb flywheel & Sport Clutch, STi Group N tranny & engine mounts, urethane spacers in rear subframe, rear diff mounts, and pitch stopper, SVX Sport Strut Springs (185f/150r), custom 19 mm rear swaybar, urethane swaybar mounts, Rota Torque 17x8", 225/45-17 Proxes 4 tires, Axxis Deluxe Plus organic brake pads.
|