Quote:
Originally Posted by SomethingElse
got to work..opened it up..sure enough...the spring was slightly deformed causing it to only make contact in one small area...after years of being abused in one spot it began to develope craters
Its just a plain relay the same one used for the band-aid fix 12v 20/30 amps
the #s read 0332204150
and the contacts inside the relay...
Attachment 12856
|
Just as I had predicted.
However I did not expect such a piece of badly designed junk, even though automotive electrics tend to be cheap and crude. My company would not have rated that relay, as capable of switching more than 5 amps of inductive load. It would have been out of the question to use same in any industrial situation.
It is up to the Subaru designers to explain why a diode is not included across the solenoid winding, so as to shunt a nasty inductive opening spike. A normally closed relay opening such an unprotected circuit, is exceptionally vulnerable.