|
Re: SVX Engine cooling "Again & Again"
For the recod the big book says 100lpm @ 3,000rpm and 200lpm @ 6,000rpm.
I have cut my manifold as you can see from the image the next plan if that doesn't fix the problem will be to put a new pipe inthe centre were the ruler is. That pipe will be 40mm as opposed to 30mm it is now. Next change the water pump inlet pipe from 30mm to 45mm if possiable. Also both inlet and outlet on the radiator changed to suit
I feel sure the inlet and out lets of the motor are both 30mm will cause a problem. Centrifugal pumps always have a larger inlet then outlet to prevent caviation.
Great the way everyone is jumping on board I think if a few of us run tests we will beat this problem finally. Have a great day or night.
Tony
__________________
1995 - SVX 700,000 K Mine, DMS Struts to lift car 2in. Tyres Wrangler Silent Armor 235/70R16, PBR Radiator. 6 speed with DCCD and R180 rer diff, Heavy duty top strut mounts front and rear. Speedo correction box fitted. New stero (gave up on the old one). Back seat removed and 2 spare tyres fitted for desert driving. ECUTune SC sitting in the box for the next SVX.
1992 - SVX 255 K Wife (Want to stay Married so not allowed to fit SC)
1992 - SVX Pearl with black roof race car roll cauge etc ready to race. Ex Tasman Targa car.
1995 - SVX Green low k mint condiation.
1995 - SVX Rally car, ex Matts car. Now to be used on track.
1992 - SVX red & Black being converted to Mid Engine.
1995 - SVX Red 143,000 bit rough.
Owned 5 others Subaru back to a 1974 1400 GSR.
|