[Szalkerous]

Originally Posted by svxfiles

I've spent eight or more hours checking air bag codes, following the FSM.
After all that I tries the easiest thing possable.
A new air bag.
Twice now that has fixed it.
Just trying to help.
Tom

Advice is always a gift.

I also realized that my negative battery terminal clamp isn't doing it's job anymore since I had it rigged with a supporting 4 gauge. I've gone out and bought a new post and wire ends and will see if it was a continuity problem. That may also explain to some degree the awful starting issue I've been having, although I think that's far more likely the ignition switch component dying on me.

I need to remove the radio to diagnose a ground hum, so we'll see if the connector the unit itself is not fully seated, and I can do further diag of voltage and resistance between there and the battery. If this ends up being fine, I will give the main airbag a shot.... err, attempt.

Can anyone tell me exactly which metal box in radio area is the airbag CU? Will it be obvious? I've never intentionally looked.

-sz