Re: Memory dump of ECU
Phil, wondering if you had some insight on the following things
Injector voltage correction time @ the following voltages
10.0v
10.3v
10.7v
11.0v
11.3v
11.7v
12.0v
12.3v
12.7v
13.0v
13.3v
13.7v
14.0v
14.3v
14.7v
15.0v
I know this is stuffed into the ECU's programming, I am just wondering if you have found it.
Also wondering if you have stumbled over the water temp correction maps?Cold start phasing?Cold start Primer?
The voltage correction time is crucial to my writing the base maps to the Nemesis. There is a VERY lengthy and boring procedure that I can do to get the correct values but i would love to avoid them if you have the data already
Tom
|