03-24-2008, 07:21 PM
|
 |
Thread Killah
|
|
Join Date: Feb 2001
Location: Greenville, SC
Posts: 5,835
|
|
The window has to come out to replace the regulator. It's not as bad as it looks. Once you pull out the trim and the little pads you'll have alot more room to work with. When I did mine I left the window bolted to the part that fits in the rail (the part you clip the sleeve lock regulator to) - I slid the whole thing out the top and then slid the old one into the new regulator rail after mounting it. It's been a long time since I did it.
__________________
Matt
Locker Link
2015 BRZ Limited 6MT
92 Ebony LS-L ECUtune Stage2av1, Z32 MAF, 370cc injectors, TomsSVX intake, BontragerWorks 22mm RSB #003, HID Hi and Lo beams, OT endlink and bushing mods, PWR Aluminum radiator, Harvey's QC shift kit, 2.5" flowmaster 80 exhaust, 17" Michelin Pilot Sport A/S, Poly sway bar bushings, Slotted Bradi rotors, AFBeefcake powdercoated calipers, 97 grill, and a huge set of air horns. 300,000 miles and counting
92 Ebony LS-L. ecutune stage1v4, motorsport 1pc pulley. Garage Queen - sold to Dad in upstate NY 155,000 miles
19 Subaru Ascent Premium - -Hers !.
89 DL 4x4 little red wagon - a.k.a. The immortal suby. 275k R.I.P.
|