09-16-2007, 10:40 AM
|
 |
Thread Killah
|
|
Join Date: Feb 2001
Location: Greenville, SC
Posts: 5,835
|
|
|
Do you have the factory main pulley?
It could very likely be the rubber dampener on your main pulley has separated.
Pop the hood, rev it at the throttle body and watch the pulley for movement forward or backward. If it moves you need to replace it before it separates completely and tears something up.
If it isn't that and you think the belts are just loose, the rule of thumb for belts is tighten them enough that when you grab it and twist it you can only twist 1/4 turn.
__________________
Matt
Locker Link
2015 BRZ Limited 6MT
92 Ebony LS-L ECUtune Stage2av1, Z32 MAF, 370cc injectors, TomsSVX intake, BontragerWorks 22mm RSB #003, HID Hi and Lo beams, OT endlink and bushing mods, PWR Aluminum radiator, Harvey's QC shift kit, 2.5" flowmaster 80 exhaust, 17" Michelin Pilot Sport A/S, Poly sway bar bushings, Slotted Bradi rotors, AFBeefcake powdercoated calipers, 97 grill, and a huge set of air horns. 300,000 miles and counting
92 Ebony LS-L. ecutune stage1v4, motorsport 1pc pulley. Garage Queen - sold to Dad in upstate NY 155,000 miles
19 Subaru Ascent Premium - -Hers !.
89 DL 4x4 little red wagon - a.k.a. The immortal suby. 275k R.I.P.
|