[svxistentialist]

Originally Posted by dumpstafresh

ok i cleared my codes drove it at least 10-15 dollars. and im down to 1 code # 22 i think that was the knock sensor right? do you have to take off the intake manifold to change that. if so im going go ahead to polish mine. theres one hanging on the wall at motorsports warehouse that looks good.

I'm not certain if 22 is left or right, but the code chart in the How To section will tell you.

You will also find out how to change them without taking off the manifold. If you DO decide to take off the manifold, then be aware there are many small vacuum pipes under there, and it's easy as pie to damage one, so be careful how you work.

If 22 is the one near the front of the engine you are in luck as it is relatively easy to see and to get to. You only need to move the alternator temporarily while you replace it.

The one at the back is a SOB to see or to get a spanner on, but it is do-able.

Best of luck.

Joe