[thegambler]

Just follow the instructions listed by svxfiles, it is "A Piece Of Cake"!

Here are his instructions = It's a piece of cake to remove the sliding metal sunroof. First run the S/R backabout 6", now CAREFULLY pry down on the sunroof headliner, it is being held in place with 6 push-pins, the front row of 3 push-pins are 2" back from the leading edge and 3.4" in from the outer edge, the center pin is 2.25" back. The second row of push-pins is 3.5" in from the sides, the outers are 6.25" back and the center is 6.5" back. The trailing edge is supported with 3 clips, the center one with a locating pin to make it easier to reinstall. The reason I listed the pin locations, is if you know where they are, there is less chance to rip the thin pressboard.
Now the sunroof headliner is wiggled out of the way, you can clearly see the 6 nuts ( I forget what size, but probably 12mm ) that hold it in. Tom

PS. The nuts are 10mm, Big Deal!"