[longassname]

No none of the 2nd batch orders have come through yet.

I welded enough of the tubing elbows for the bypass for the 1st and 2nd batch and left the rest for later. The big time savings there in doing a big batch is in the cutting--I cut plenty of pieces for later; I just did't weld them.

I don't remember if I've already said I ground the supercharger flanges on the throttle body adaptors yet or not but I have and I drilled and tapped the throttle body adaptors for the bypass valves.

I welded the tubing on the manifolds for the bypass as well. The manifolds and throttle body adaptors are now done being fabricated and ready to be finished. I'm going to have to do some more paint removal at least on the white manifold and then they are ready for powder coating.