Tom, I got the pump.
I also recieved the 3.9 transmission today. I hope/assume it's in better shape inside than outside. I'm going to have to sandblast it before I put it in my car. I don't roll with corosion.
I got the heads off the bench engine and to the machine shop for a light surface grind, valve job, and pressure test. I've decided not to open up the short block. It looks like it's in pretty good shape so I'm going to leave well enough alone there and just reassemble the engine with new gaskets and seals.
I've matched up the throttle body adaptors with the manifolds they fit best and am plugging away at further fitting them so that they line up nicely with the manifolds.
|