Quote:
|
Originally Posted by TomsSVX
the connector that goes to the Position switch on the side of the trans. Has a row of wires. Two of which are Blue/white and Black/yellow. The two following in the row are the neutral wires. I cannot recall their colors as of right now but they are directly in line with the two mentioned above. The blue/white and black/yellow are the neutral wires and need to be wired to the clutch swtich that is on top of the assembly.
Tom
|
Yea...that worked, Tom. For whatever reason, when my brake switch was in closed position, it wasn't closed. I took it out, tested it with a multimeter, it was fine, I put it back in, and my brake light problem went away. So, thanks for the help
It's all up and running. Got some tuning to do, but overall it's great
