Quote:
|
Originally Posted by -JJ-
but i have plans do do cam work..... didnt u specify the need to have a 4.11 or 4.44 to do that sort of work (incresing durations etc)?? or can i do the cam work on the stock ratio?
Also option 1 was a quote from the builder of the rigoli wrx auto box
basically i dont wanna get the stock box fixed now if later i need to change it again to do the cams
|
Depends on what cam, if you use the 247*8mm cam, it will work with the standard ratio, remember ours is lower at 3.7. If you are going bigger duration, and higher up the rpm range, or want the lower speed acceleration,
then use the 4.11. decide now. If you want to go lower ratio, get them to rebuild it with the 4.11 front diff, and fit the 4.11 in the svx rear.
Honestly I think the rebuild, by them, well make a bullet proof box. The SVX box has a stronger high clutch and better AWD than the four cylinder boxs.
Harvey.