[kewilo]

Hi guys,

Just got my car back after two months in the shop for the conversion. A 4.11 was installed in it from a 2000 RS with a 1999 RS rear diff.

The car is shifting smoothly, no warning lights on the dash and it looks faily clean.
However first gear feels terrible. From the posts i've read on this site, i was expecting the low end to improve significantly. My automatic can outrun this one. It should be noted that there is a large hole in the exhaust pipe between the downpipe and the center cat. Hopefully i will be satified after i correct the situation.

Here is why i need bushings. During a swift take-off there is rubbing/shaking coming from the rear end. My mechanic said it was the rear diff cuased by the swaying from the high torque. Apparently i need new bushings for the tranny mount and rear diff.

Just wanted to know what you guys thought of this analysis and where and what kind of bushings i could get.
Also, where can i get polyeurethane sway bar bushings. I checked energy suspension's site but the svx is not listed.

Thanks.