|
Arrived
Mine arrived today. A few bent fins, but otherwise ok. I will admit, though, that I have seen considerably smoother and uniform welds before.
Cap postion?? In the slot that the cap hold down tabs ride in there is an indented place at the center position. I am pretty sure that this is where the cap should be positioned. You can depress it to take it off OR push it further off center. This would cause the problem previously identifed in here.
Lee
__________________
SVXx2
92 SVX LS-L Silver
92 SVX LS-L Burgundy (structurally challenged with 2792 miles)
96 SVX LSi Red
92 SVX L Pearl (Body-rust free)
20 F150 4X4 King Ranch
FREEDOM IS NOT FREE
|