need a victim, err..., volunteer
I've got a project going with SVXRide to make a custom large diameter front swaybar for his car. My mechanic for this project is Dave Clark Motorsports in Kent. I don't have time to drive over to the West Side to leave my car with him for a day so he can fit the components. Is there anyone going to the Seafood fest that would be willing to drop off their SVX at Dave's shop for a day so he could fit a front bar to the car? After he's done, he'd put the OEM bar back on the car. Asking the Seafood fest attendees because I'd like to hand you the swaybar components at the fest. Let me know if you'd be willing to help. Thanks!
__________________
Mychailo
:: 2006 Silver Mitsubishi Evolution 9, E85, 34 psi peak, 425wtq/505whp DJ ::
1995 Laguna Blue SVX L AWD 5MT (sold)
Visit my locker
SVX Mods: ND iridium spark plugs, Impreza RS fpr, afr tuned to 13.2:1 using a custom MAF bypass, custom exhaust, WRX 5MT w/ STi RA 1st-4th gear & stock WRX 5th gear, Exedy 13 lb flywheel & Sport Clutch, STi Group N tranny & engine mounts, urethane spacers in rear subframe, rear diff mounts, and pitch stopper, SVX Sport Strut Springs (185f/150r), custom 19 mm rear swaybar, urethane swaybar mounts, Rota Torque 17x8", 225/45-17 Proxes 4 tires, Axxis Deluxe Plus organic brake pads.
|