Quote:
Originally posted by SVXRide
So, they didn't hand out a print out of the course lay out? The local DC chapter hands copies out, and then you just have to mark them up after you walk the course - they usually make changes after the fact if they find that the course gets a little too fast in spots.
-Bill
p.s. Mr. Dyno showed up this morning. Talk about your crappy I/F I'm going to see if I can't bend up a bracket to bolt inside the car. I don't think they'll let me run with just the suction cups holding it to the windshield.
|
They did hand out a layout, but it didn't perfectly match the course. I did prewalk the course, but didn't seem to help much.
Those suction cups are very powerful. If the window is clean, you won't be able to get the suction cups off unless you pull on the tabs on them.
__________________
Mychailo
:: 2006 Silver Mitsubishi Evolution 9, E85, 34 psi peak, 425wtq/505whp DJ ::
1995 Laguna Blue SVX L AWD 5MT (sold)
Visit my locker
SVX Mods: ND iridium spark plugs, Impreza RS fpr, afr tuned to 13.2:1 using a custom MAF bypass, custom exhaust, WRX 5MT w/ STi RA 1st-4th gear & stock WRX 5th gear, Exedy 13 lb flywheel & Sport Clutch, STi Group N tranny & engine mounts, urethane spacers in rear subframe, rear diff mounts, and pitch stopper, SVX Sport Strut Springs (185f/150r), custom 19 mm rear swaybar, urethane swaybar mounts, Rota Torque 17x8", 225/45-17 Proxes 4 tires, Axxis Deluxe Plus organic brake pads.
|