Quote:
Originally posted by dcarrb
Adjust the wiper travel so that the wipers rest properly in the stops when fully down. I painted my wiper arms recently and it took a bit of tinkering to get them repositioned properly.
|
I've painted 3 sets of SVX wiper arms, front and back, and I use this little trick to keep track of their positions: before you do anything, put a small piece of masking tape on the glass just below the wiper blade (this only works if your front blades are resting on the windshield and not below it). Now take your wiper arms off and paint them. After they dry, mount the arm so that the blade is resting just above the masking tape. Now you can remove the tape and your wipers will work fine without needing to be adjusted!
Dave