View Single Post
  #7  
Old 04-20-2004, 10:57 AM
mbtoloczko's Avatar
mbtoloczko mbtoloczko is offline
sans SVX
 
Join Date: Sep 2002
Location: Richland, WA
Posts: 4,250
Send a message via AIM to mbtoloczko
If you have access to an accurate measuring caliper, the easiest way to check would be to measure the wire diameter of the springs.

Stock front: 0.565"
Stock rear: 0.505"

Be sure to clean off as much crud as possible from the wire, and measure the wire from an angle where the curvature of the wire has no effect on the measured diameter.
__________________
Mychailo
:: 2006 Silver Mitsubishi Evolution 9, E85, 34 psi peak, 425wtq/505whp DJ ::
1995 Laguna Blue SVX L AWD 5MT (sold)

Visit my locker

SVX Mods: ND iridium spark plugs, Impreza RS fpr, afr tuned to 13.2:1 using a custom MAF bypass, custom exhaust, WRX 5MT w/ STi RA 1st-4th gear & stock WRX 5th gear, Exedy 13 lb flywheel & Sport Clutch, STi Group N tranny & engine mounts, urethane spacers in rear subframe, rear diff mounts, and pitch stopper, SVX Sport Strut Springs (185f/150r), custom 19 mm rear swaybar, urethane swaybar mounts, Rota Torque 17x8", 225/45-17 Proxes 4 tires, Axxis Deluxe Plus organic brake pads.
Reply With Quote