Check out this for a step-by-step SVX brake installation:
http://www.ryanmacdonald.com/car/howto/brake/brake.html
If the old rotors won't come off, you can use a little WD-40 and let them sit until it loosens them up. Then give them a few gentle taps until they come off. The brakes I replaced were aftermarket ones that didn't have the bolt hole to use to loosen the old rotors.
I am looking for a how to on how to replace the brake lines. I bought some SS lines I need to install and I don't have the first clue on how to go about it. Pictures are always nice.
Matt