It's time to replace my rear bearings (noise getting louder). I've seen alot of entries about these rear bearings (e.g. don't torque too tight, replace shipping grease, etc.), but can't find a step by step how to for the replacement. I'm sure there's an old post, but I don't know where to find it (if it exists)? Please tell me exactly where to find it and how (because I've used the SEARCH and all I can find are related comments only).
THANKS!
P.S. For those who know me: BTW, my car is still working without rough idling (very infrequent and mild) or shuddering!(?)
__________________
Jim
1995 Laguna Blue SVX AWD L - 240K (daily driver) -
"ReBuILT" used engine at 236K miles (6/13)
2013 Veloster Red - Driver Now??Dropsprings [1/2" rear, 1" front] with Koni Strut Inserts> Magnaflow Exhaust System>
ECUTune Stage 1av1 Upgrade (from 1v4)>
ECUTune TCU MOD> Aluminum Crankshaft Pulley> Stainless Brake Lines> Phenolic Spacers>
Perforated Brake Rotors (dint like, OEM now)> SmallCar Shift Kit (resting since TCU MOD)> 7-Position Ground System>
High-Pressure Fuel Pressure Regulator (resting)> ATF Cooler & Campaign Filter> Yellow Polish Polyurethane Bushings> Pioneer Double-DIN Stereo with JL AUDIO Speakers>
Driveshaft Rebuilt with C-Clip U-Joints>
15 Min MOD>
20 Min MOD .. . (2011)
Valentine One Radar Detector with Remote Display - ucan'tseeme! 