help on fixing glass molding..
 

I have a gash/slit on the lower portion of the fixed glass, hard to explain, so i attached a pic...circled in red...

anyone know the removal and installation procedure? thanks in advance, chris

Re: help on fixing glass molding..
 

It is glued on the inside of the car to the metal frame. I would take a heat gun to it and roll the edge towards the outside, then remove it, and reapply weatherstrip adheasive to the new moulding and use several c-clamps to hold the new rubber tight in place against the frame and let it set up for several hours.

Re: help on fixing glass molding..
 

Hi Chris, hope these help. The last three are most relevant & one of them describe the heatgun rolling thing redlightning recommended - the first couple give an overview of the whole door/window mechanisms and tolerances.

Windscreen place told me to use either 3M weatherstrip adhesives &/or 3M quick-fix (for smaller tears).

Now if only they could have told me why the lower front part of the upper glass seems to have a foam strip that joins to the normal weatherstrip and how to fix or recondition that.

Tania.