The Subaru SVX World Network - Tranny pan tightening procedure

The Subaru SVX World Network (https://www.subaru-svx.net/forum/index.php)

- Technical Q & A (https://www.subaru-svx.net/forum/forumdisplay.php?f=5)

- - Tranny pan tightening procedure (https://www.subaru-svx.net/forum/showthread.php?t=34287)

Ken92SVX

07-18-2006 08:25 PM

Tranny pan tightening procedure

I have a leaking tranny pan that I can't stop, so I am getting a new pan, gasket and bolts. Does anyone know what the torque is on the tranny pan bolts and if there is a specific procedure to tighten the bolts?

Earthworm

07-19-2006 10:11 AM

The only process I know is to tighten the bolts in order around the pan. (not criss-cross)

seion

07-20-2006 02:29 PM

Quote:

Originally Posted by Earthworm

The only process I know is to tighten the bolts in order around the pan. (not criss-cross)

Hmmm....I always do it criss-cross from the center out to avoid stress bends in the mddle. I also use hi-temp RTV on the pan and tranny and a gasket (cork or rubber in the middle of the RTV sandwich).

All times are GMT -6. The time now is 02:51 AM.