Help to coneck Speed senor. (need wiring diagram)
 

Is someone that can help me to get the speed sensor wired rigth up?
I have the stock transmission contac this one.
http://i457.photobucket.com/albums/q...g?t=1283879034

And now i need to conect the US speed sensor this i have take from a outback tranny and the sensor is cut off. And its have white and black wire.
http://i457.photobucket.com/albums/q...g?t=1283879034

(The contac i have is from a european car)

Re: Help to coneck Speed senor. (need wiring diagram)
 

I have find a other topick that i see the speed senor on the contac but.
http://www.subaru-svx.net/forum/show...t=50185&page=2
But the stock speed senor is conect in 3wiers if i understad this right.

white+blue white stripes + black yellow stripes.
And all this go up to this one.
http://i457.photobucket.com/albums/q...g?t=1283882551

Is it this wire i should coneck the wire form the us-speed senor?
http://i457.photobucket.com/albums/q...g?t=1283882551
This one:confused: this have only 2 wieres

This is to get my manual tranny to read speed.

Re: Help to coneck Speed senor. (need wiring diagram)
 

AFAIK it is not compatible. You must use a 3-wire sensor for this ECU.

Re: Help to coneck Speed senor. (need wiring diagram)
 

Ok so the i have to get a other from a Europan car? But this i can just wired up to the OME tranny contact?

Re: Help to coneck Speed senor. (need wiring diagram)
 

I have maybe get one now.:)
This is from a impreza 99.

Re: Help to coneck Speed senor. (need wiring diagram)
 

Install the SVX 3-wire speed sensor in the 5MT gearbox.

pin 1 (YR) is the signal wire.
pin 2 (BW) connects to ground
pin 3 (RW) connects to 12v

Remove the YR wire from pin C6 of the TCU plug and connect it to the signal wire of the speed sensor.

Re: Help to coneck Speed senor. (need wiring diagram)
 

Ok thanks alot.:) I sit and wait for the answere on the speed senor.
And i hope i get it fast. But thanks fore helping me.:D

Re: Help to coneck Speed senor. (need wiring diagram)
 

Is it somebody here that have one for sale?:)

I dont have get one yet.:(

Re: Help to coneck Speed senor. (need wiring diagram)
 

Are you looking for a stock US speed sensor with 3 wires?

Re: Help to coneck Speed senor. (need wiring diagram)
 

Is it some one here that have the wiring for this?
I just have the sensor. And not the contakt whit the wiring on.:(

Re: Help to coneck Speed senor. (need wiring diagram)
 

Alex have a look at this post. It talks about the way to connect the US speed sensor up, using the VTD TCU. Phils scan is the US connection that you need to do, to get the sensor to drive the speedo.

http://www.subaru-svx.net/forum/show...7&postcount=15

Harvey.

Re: Help to coneck Speed senor. (need wiring diagram)
 

Thanks for posting oab_au

But my problem now is i just have this part in My transmission now
(note this is a US one)
http://i457.photobucket.com/albums/q...-svx/001-1.jpg

But to get this work i need one of these.
(note just the 3wired one)
http://i457.photobucket.com/albums/q...-svx/002-1.jpg

And this part i have try to get, but seen that no one have it. :(

Re: Help to coneck Speed senor. (need wiring diagram)
 

Alex you mean that you just need the 3 pin wiring plug, that plugs on to the US speed sensor?

Harvey.

Re: Help to coneck Speed senor. (need wiring diagram)
 

Yes thats rigth. :) But i dont have the US speed sensor. will this fit then?

Re: Help to coneck Speed senor. (need wiring diagram)
 

OK, we'll get there mate. :)
Do you need a US speed sensor?
Do you need the plug, with some wire, for the US sensor?

Yes it will work, Huck said so.:D

Harvey.