trans compatable?
 

Will an auto trans from a 97 outback sport wagon bolt into my 92 ls-l? There's a guy selling a reman with papers for 300$ no rear diff though. If it bolts up ill be pumped, but how do i find the trans ratio and how hard would it be to find a matching rear diff any thoughts?:confused:

Re: trans compatable?
 

If you are referring to an Impreza Outback Sport Wagon transmission, than yes it will bolt in, BUT the ratio, (if stock) is 4.11 to 1 and has not been found to be very long lasting behind our bigger engines/heavier cars.
In addition to changing the rear differential, you must NOT use the weaker torque converter and trade out the front speedometer sensor. (#2)

Re: trans compatable?
 

Alright thanks I just figured it was cheap enough to look into as my trans has 180k on it and I'm going to build the spare motor I bought for it some.

Re: trans compatable?
 

Ok found a rebuilt legacy outback trans and again the guy does not know the final drive or have rear diff. Correct me if I was mis informed but I was recently told all automatic awd legacy's in the mid 90s had same final drive? Is this correct and what is nthe ratio?

Re: trans compatable?
 

Grab the code off of the transmission bellhousing and throw it into google. Failing that, there is a transmission chart on my Impreza site, northursalia.com, that will give you all the info for a given tranny code.

Re: trans compatable?
 

All automatic Legacy Outbacks from 1996-early 1998 had the 4.44.
Just post the trans # here and make sure it does not have a factory spin on filter on the left side.

Re: trans compatable?
 

This is the ID he gave me # TZ102Z2CBA-BT

Re: trans compatable?
 

http://www.subaru-svx.net/forum/show...ght=TZ102Z2CBA
this should help........G

Re: trans compatable?
 

Cool beans I'll snag it this week, freshly rebuilt 4.44 should compliment my spare low milege motor nicely, powertrain swap here I come :cool:, now just need a rear diff to gut and I'll be golden :D

Re: trans compatable?
 

Will this trans build on to mt svx?
http://www.laga.se/delinfo.aspx?delindx=47023645

How expensive is it to have a svx trans rebuild?

What is it inside that gets damaged?
Valves, slides, pump or just every thing?