Need New Struts
 

1995 svx l 110,000 miles i need new struts all the way around, what should i get and wehre?

There are two options that I know of.
1) new ones from Subaru.
2) koni inserts.

I'd recommend the Koni's. I havnt used them myself (still on the origionals) but I believe I will be getting them soon. I've heard good things about them compared to the stock ones. You could also get coilovers from Dayle at Motorsports warehouse too. I think he sells his coilover kit for $2500 minus a Network discount.

so they are rebuildable, ive never done much with struts other than replace them how hard is this to do? also how much and what are the part numbers do i need other parts other than the inserts? went to www.koni.com i dont see anything listed im guessing there is somthing that fits?

You can get info on the konis & order them from www.classicgarage.com

sweet back to my edited post can i do this myself how hard is it compared to a normal strut change??

oh yea and do i need to replacve springs, or is that up to me, i assume it is but like i said havnt done this paticular car yet, just tired of ti ridint lieka grocery cart

The Konis are actually on sale right now at www.classicgarage.com
:D

The konis are inserts. So you have to gut the old struts and install the inserts into them. You would have to drain the oil out of your struts and then cut the tops off them. The inserts slid inside your old struts and bolt thought the bottom.
As for springs to can get them from motorsport warehouse or go with ground control coil overs if you go with the konis.

Mychailo has them cheaper and will rebuild them for you. He also does springs.
http://rallyeng.selfip.com:8080/SVX/...ort_parts.html

Why are those references not listed anywhere not even on the Koni catalog?

Possible to pair the Subaru OE struts with the motorsport warehouse springs?

To my knowledge Classic Garage is the only customer Koni has for the SVX inserts. They wholesale and retail them. Koni North America does not stock them. They are made to order.

i'm using OE struts and motorsport springs. lose a bit of ride quality because of the lowering springs. but it's expected, nothing to really complain about

i almost sure that they could be measured and sombody makes them....just a mater of finding the person that can do this...