CNC machined parts for SVXes coming
 

I just picked this up today! It is a small CNC milling machine, the MAXNC 10.


I plan to use it to make some aluminum SVX parts, such as..

1. Battery hold down (test project) with SVX logo or something
2. Camber plates for front struts
3. Aluminum trans. pitch 'dogbone'?
4. ???

Any ideas out there?
A few limitations:
a. Needs to be Aluminum or plastic
b. Not too big..the machine is small, but some larger things could be finagled in there.

Re: CNC machined parts for SVXes coming
 

Wow, awesome! What programming is it running? I've got HAAS and FANUC machines at school that I'm learning to program right now.

Re: CNC machined parts for SVXes coming
 

thats sooo neat :)

Re: CNC machined parts for SVXes coming
 

I would buy some of the battery hold downs. :) Start with those first. ;)

Re: CNC machined parts for SVXes coming
 

2 cms flange for the rear strut (It goes above the mount to increase the height of the SVX rear).

Re: CNC machined parts for SVXes coming
 

could be interested in that... the battery tie-down, and the rear damper block... camber plates.... good stuff.

Looking forward to the progress reports.

Re: CNC machined parts for SVXes coming
 

Verrrry interesting. I'm thinking...

Re: CNC machined parts for SVXes coming
 

Nice one!

Congratulations on the purchase Steve.
:)

Re: CNC machined parts for SVXes coming
 

Sounds awesome. Id love the tiedown dogbone etc. I'm sure the dogbone would be firmer than the plastic and used with urithane bushings?

Re: CNC machined parts for SVXes coming
 

Woohoo! Prototype #1

http://lh4.ggpht.com/_IDKL1NuncW4/S4...2016.59.10.jpg

http://lh5.ggpht.com/_IDKL1NuncW4/S4...2016.59.34.jpg

Re: CNC machined parts for SVXes coming
 

Coooooooooooooooooooooooolllllllll!!!!!!!

Re: CNC machined parts for SVXes coming
 

Cool! I'm looking forward to a battery tie-down.

Re: CNC machined parts for SVXes coming
 

Very cool steve!!:D

Tom

Re: CNC machined parts for SVXes coming
 

oooo sexy. fyi ur almost at a 1000posts :D

Re: CNC machined parts for SVXes coming
 

That's a good idea :)