Pulling codes from ECU
 

Does any one have clear pics of the diagnostic plug with the blue wires inserted? I've been trying to pull the codes but it's not working and I want to see if I'm doing this correctly.

Thanks

Re: Pulling codes from ECU
 

Its the small black piece with 10 holes.

L

Here's a thread that has a pic attached at the bottom of the connector and the wires. The wires are not inserted into the connector, but the rest of the post will give you good instructions.

http://www.subaru-svx.net/forum/show...&threadid=8267

Matt

I've been told that it's the large plug with 16 holes

I can't remember how many holes it has, but it's black and has a notch in the middle of the top row. You can see it in the pic at the bottom right. I had to dig to find it. My blue wires were taped together. Make sure you have a good flashlight and dig around.

Matt

There are 2 black plugs. Ones large and the other smaller

Success
 

I was able to finally pull the codes and as I suspect I'm in the market for a new air flow meter. Thanks for all the help