Rust Repair on Quarter Panel
I had some bubbling on my right quarter panel dead center right on the lip. Once I removed rubber molding under the lip a chunk of rust fell out and this is what it looks like now. Anyone have a rust free donor right side quarter panel, which I will need to have cut and welded in. Another member told me to have it cut right on the center seam of the quarter panel. I wont be doing this until next spring.
http://i361.photobucket.com/albums/o...6/100_2815.jpg http://i361.photobucket.com/albums/o...6/100_2812.jpg |
Re: Rust Repair on Quarter Panel
Same problem - if you find two I am interested also :-)
Tapani |
Re: Rust Repair on Quarter Panel
A bit late for your problem but someone has suggested to prevent this, remove the molding, clean the area, and reinstall sealing the lip with RTV. Only problem I see with this is most RTVs release a mild acid while curing (or so I've been told).
|
Re: Rust Repair on Quarter Panel
The cheap RTV you get at the auto parts or discount store is corrosive. Something like this would be better:
http://www.wttool.com/index/page/pro...Fa1aMgod1z8A5w |
Re: Rust Repair on Quarter Panel
Quote:
Really great info. Thanx |
All times are GMT -6. The time now is 08:00 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122