ABC Pillar cover removal - install???
Before I dive in and break something. Can anyone tell me what needs to be done before I swap interior pillar covers? They are auto seatbelts btw. Does anything need to come out first before yanking the old ones out? Any screws I should know about? I'm hoping it's just a matter of pulling the old ones out and popping the new ones in:rolleyes:
|
Re: ABC Pillar cover removal - install???
Michael,
You will need to remove the philips head screws both on the grab handle and each one located inside of the two coat hooks on the c pillar. The A-B Trim needs to come off prior to removing the C trim. Grasp the pillar trim firmly and pull straight towards the inside of the car and slightly down. Voila.:) |
Re: ABC Pillar cover removal - install???
Thanks Mike, that's what I was hoping for. The tint shop put some small cuts in the B pillar 10 years ago. Now they have grown into large cuts so they have to go.
|
All times are GMT -6. The time now is 05:06 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122