how to replace my knock sensor
Is there a link or does any body have a how to for replacing the knock sensor? I have 1 1992 LSL
|
Do a search of the site. There are actually two knock sensors - one for each bank of cylinders. The passenger's side one isn't all that bad to get to. The driver's side requires a lot of patience. You'll have to remove the alternator to get to them.
-Bill |
I did the drivers side one. It wasnt too hard. Just required patience. Do a search and you will find alot of information.
|
The easy (and probably more costly) way would be to remove the intake.
The way I changed mine was to tape 2 wrenches locked together for the added reach. |
Step by step:
http://www.subaru-svx.net/forum/show...threadid=17952 |
All times are GMT -6. The time now is 12:49 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122