WTB: Factory Alarm System (S.A. TX)
 

I'm looking for a factory alarm with the dash button.

It's for a '95 so it has to be out of a '94 or newer (they are mounted in the trunk instead of under the dash).


I'll update this with a picture of the dash button I'm talking about and the location of where the unit would be in the car.



Edit: Pictures

Security button:
http://i53.tinypic.com/2rmwi89.jpg

Alarm unit location:
http://i54.tinypic.com/mmzcqq.jpg

http://i55.tinypic.com/29gc0om.jpg


Thanks!

Re: WTB: Factory Alarm System (S.A. TX)
 

Any security module will work. They all have the same connector whether it is the early single airbag car with it above the glovebox or the later with it mounted on the trunk panel like yours.

Re: WTB: Factory Alarm System (S.A. TX)
 

How sure are you about that?

I only ask because I'm not sure if the plug in my picture is actually the plug for the module (there were a few others in the same general area).

If they are the same then thank you for making my search much easier! :D

Re: WTB: Factory Alarm System (S.A. TX)
 

I'll confirm that they are the same. I've used one's from the trunk deck up behind the glovebox.

Re: WTB: Factory Alarm System (S.A. TX)
 

Awesome!

Thank you both for the info!

I'll have to go dig around in the parts car for the things I need.

This thread can be closed now

Re: WTB: Factory Alarm System (S.A. TX)
 

And I have used one from a 92 in my 94.

Also, even if the car didn't have the security module, it should still have the plug for it. At least the US ones.

Re: WTB: Factory Alarm System (S.A. TX)
 

Yep, This type security was a US only option and was installed at port.

Also, look at the sig, I think I would know if something was interchangeable between early/late models :p