The Subaru SVX World Network

The Subaru SVX World Network (https://www.subaru-svx.net/forum/index.php)

- General SVX Babble (https://www.subaru-svx.net/forum/forumdisplay.php?f=2)

- - Headers on ebay (https://www.subaru-svx.net/forum/showthread.php?t=50646)

redlightningsvx

06-16-2009 05:42 PM

Headers on ebay

http://cgi.ebay.com/ebaymotors/Subaru-EG33-Ehaust-header-primary-pipes-SVX_W0QQitemZ300323199589QQcmdZViewItemQQptZMotors _Car_Truck_Parts_Accessories?hash=item45eca85a65&_ trksid=p4506.c0.m245&_trkparms=65%3A10|39%3A1|240% 3A1318

1986nate

06-16-2009 05:46 PM

Re: Headers on ebay

Doesn't look like its going to really be any type of an upgrade/improvement from stock

Gamesy

06-16-2009 06:08 PM

Re: Headers on ebay

its also a 3bolt flange, unless mine is diff, we have a 2bolt

1986nate

06-16-2009 06:15 PM

Re: Headers on ebay

Quote:

Originally Posted by Gamesy (Post 605465)

its also a 3bolt flange, unless mine is diff, we have a 2bolt

That doesn't matter though, you would have to modify the rest of the exhaust as well as these would go further back than the stock manifolds. The flanges shown lower in the pic would need to be welded on the next set of pipe before the precats.

SomethingElse

06-16-2009 06:19 PM

Re: Headers on ebay

no installed pics:confused:

I wonder how well they clear the cross member.

Gamesy

06-16-2009 06:31 PM

Re: Headers on ebay

Quote:

Originally Posted by 1986nate (Post 605468)

ya good point

TomsSVX

06-16-2009 08:04 PM

Re: Headers on ebay

Quote:

Originally Posted by SomethingElse (Post 605469)

no installed pics:confused:

I wonder how well they clear the cross member.

They don't. notice the auction lists them for the engine not for the car. Thats because you might be able to use them in a vanagon or something it was swapped into

Tom

svxfiles

06-16-2009 08:08 PM

Re: Headers on ebay

Quote:

Originally Posted by SomethingElse (Post 605469)

no installed pics:confused:

I wonder how well they clear the cross member.

These headers are for a EG33, but not an SVX...

But, do not cross these guys off of the list yet.

I am in contact with them and have sent them some of our requirements.

If they can/will make some headers that will "MOSTLY" bolt into a performance exhaust, then this is FREEKLIN GREAT!!!!!

I will find out more (maybe tomorrow), and report back!:)

redlightningsvx

06-19-2009 07:18 PM

Re: Headers on ebay

OT any updates?????

svxfiles

06-20-2009 02:58 AM

Re: Headers on ebay

Quote:

Originally Posted by redlightningsvx (Post 605903)

OT any updates?????

I got an e-mail back from them and have to call them back.
I think that I can send them a pair of factory headers, and pre-cats for them to use as templates.

Today Di and I had to run about 278 miles, EACH WAY:eek::eek::eek: to rescue a stranded SVXer with a dead alternator on the side of the highway.:rolleyes:
And we will be running down to North Carolina on Monday to rescue another one. (ie, tow it back here for a trans swap.)

So we have been a little busy....
More as soon as I find out.

Tim	06-20-2009 06:33 AM

Re: Headers on ebay

Quote:

Originally Posted by svxfiles (Post 605953)

Busy is always good :)

huck369

06-20-2009 10:48 AM

Re: Headers on ebay

Quote:

Originally Posted by svxfiles (Post 605953)

And we will be running down to North Carolina on Monday to rescue another one. (ie, tow it back here for a trans swap.)

Why not put it off till next weekend, and come to the Dragon in NC (while you're there) then take the car back as you go....;)

(Shameless Dragon Plug)

1986nate

08-09-2009 12:20 PM

Re: Headers on ebay

Quote:

Originally Posted by svxfiles (Post 605953)

I got an e-mail back from them and have to call them back.
I think that I can send them a pair of factory headers, and pre-cats for them to use as templates.

Did you ever get back to this, Tom?

All times are GMT -6. The time now is 10:02 AM.