Having starter issues after 5mt swap
Has anyone had problems with the starter after 5mt ('98 Legacy GT) swap? I was told it needs shims, but where do I find them or what is the fix?
|
Re: Having starter issues after 5mt swap
Quote:
|
Re: Having starter issues after 5mt swap
Shimming a Subaru starter would have no effect, it's not a Chevy starter, it bolts straight in, not straight up like on a V-8, so I don't know what kind of issue you are having without further info.....you did get a Manual Trnasmission starter right?, the old 4EAT one will not work on the manual.
|
Re: Having starter issues after 5mt swap
Quote:
|
Re: Having starter issues after 5mt swap
Sometimes it starts and other times it doesn't. If it won't start, all I have to do is push it a little and pop it in gear. Then it'll start right up. It's a starter for a '98 Legacy GT.
|
Re: Having starter issues after 5mt swap
I'm using a starter for a '98 Legacy to match the trans I put in.
|
Re: Having starter issues after 5mt swap
Sounds like one of a few problems, first flywheel teeth may be worn in a few spots the starter can not grab on them, 2 a tooth on the starter is bad, or 3 the armature in the starter has a bad area.
|
Re: Having starter issues after 5mt swap
Quote:
|
All times are GMT -6. The time now is 12:39 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122