|
Part Out: Red '94 FWD
THIS PART OUT IS FINISHED. IF YOU PM'D ABOUT SUSPENSION PARTS, THEY MAY STILL BE AVAILABLE AT A LATER TIME. I STILL HAVE THE CAR, IT'S JUST TOO MUCH OF A HASSLE TO SHIP PARTS BECAUSE OF MY WORK SCHEDULE. ONCE I HAVE PULLED ALL THAT I INTEND TO KEEP, I WILL STRIP A FEW OTHER PARTS AND PUT THEM UP FOR SALE (INCLUDING SUSPENSION)
|
Do you have a good front diff?
|
Yes, the front diff in the FWD transmission is fine. However, I'm not planning to disassemble the trans. It will go as a unit.
|
Quote:
|
How much for a driverside doorsill strip. (the plastic trim piece that covers the edge of the carpet under the door.) With the white clips?
|
Quote:
|
How about the TPS to 08809?
|
Mat,
How much for all the juicy lil' woodgrain-like interior pieces? Local of course...:D -Daniel |
Actually, this has the gray dash bits. It's pretty good looking in my opinion if you want to come check it out.
|
Okay...here are the parts I'm thinking of taking off the car before sending it to a junk yard. Let me know if you want any of these, or if there is something else you want.
Available now: Struts Springs Wheels (no wheel caps) knuckles Window regulators Moving window glass Door seals (door side) Seats Gauge cluster Shift selector FWD transmission Starter Carpet Rear seat belts Front seat belts (automatic type) Gray pillar trim pieces Trunk carpet ECU FWD TCU Slash guards (including the one under the engine) RR Bumper Steering rack Tie Rod Ends This is about all I plan to pull before junking it. Let me know what you want :) Mat |
radio cage with door?
sunvisors if they don't droop? |
Sorry...radio cage is gone. This is a strange part out car because half of the good stuff is already missing. Sorry :o
|
front passenger fender to 10514
|
http://www.subaru-svx.net/photos/fil...klix/36679.JPG
How much to 01938 please? if you think you can cut it out that section. Thanks alot. |
Jvan,
I'll send you a pic of the fender to make sure it's in good enough condition for you. There is a small dent right where the fender meets the plastic side skirt at the bottom. Speedklix, Not sure about cutting out that section. I have the tools to do it, but how much of it do you need? |
| All times are GMT -6. The time now is 06:02 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122