Front Differential Dipstick
Are there supposed to be any o-rings on the front differential dipstick? I just changed the fluid, and the dipstick fits pretty loosely in there...
|
Re: Front Differential Dipstick
Yes, there's an o-ring on it. I replaced mine a couple months ago.
|
Re: Front Differential Dipstick
thanks! Was it at the top, or down about a third of the way?
|
Re: Front Differential Dipstick
It should be at the top. It is similar to the oil dipstick. :)
|
Re: Front Differential Dipstick
I figured it out. The o-ring is actually about 2 inches down from the top on mine. The old one was so petrified, I thought it was part of the plastic part that holds the o-ring in. I cut it out with an x-acto knife and put a new one in...tight as a drum...
|
Re: Front Differential Dipstick
Great! They do get very hard and don't look like an O-ring anymore. :D
|
Re: Front Differential Dipstick
I need a new o-ring too. What size should I get? Thanks. Bill Z
|
Re: Front Differential Dipstick
Quote:
|
Re: Front Differential Dipstick
Good idea. I've only seen them sold individually at my local hardware.
|
Re: Front Differential Dipstick
I work at a hardware place I'll pop my dipstick out and find the right size when I am work.
|
Re: Front Differential Dipstick
We have a dipstick on the front differential???? :confused:
Wow, have I been that ignorant all along? ...better yet, don't answer that. -sz |
Re: Front Differential Dipstick
Quote:
|
Re: Front Differential Dipstick
Quote:
I thought our differentials were more "maintenance free" (like my Chevy's)..... What's the recommended change interval? |
Re: Front Differential Dipstick
Quote:
http://www.subaru-svx.net/photos/files/How-To/25365.pdf I replace mine every ~60K miles... And BTW, I now have a dry engine, no drips on the floor since I replaced that dipstick o-ring which seems to be the last thing leaking...:D |
Re: Front Differential Dipstick
The parts diagram on Subaru Parts lists the o-ring as 13.8x1.9 p/n 806913060. Anybody able to translate? O-ring usually have three dimensions. Thanks. Bill Z
|
All times are GMT -6. The time now is 10:17 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122