Konis
4 Attachment(s)
Dont believe the measurements for cutting off OE strut guts.
I had to cut off probably 10mm more than the listed #'s in Koni instructions. Other than that, a lil time consuming but handles better now. Guess it should for $825, eh? |
Re: Konis
Not sure why you would "have" to cut off more than the instructions state. Please explain, as I've done 2 conversions using the specified cut and they fit together nicely. :confused:
Glenn |
Re: Konis
Quote:
Lee |
Re: Konis
Well that fact that the bottom bolt wasn't able to engage seems like the specified 40mm cut is to short. Since the bottom bolt needs to engage the bottom of the strut to pull it tight. My cuts seemed closed to 50mm to get the bolt to thread in.
|
Re: Konis
Quote:
Lee |
Re: Konis
Quote:
...and/or use the supplied bolt w/o the lock washer to increase reach to start. Glenn |
All times are GMT -6. The time now is 02:42 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122