AWD's Bolt-in Cat-back Exhaust
Well its about time there was a bolt-in exhaust solution besides the Stebro that sounds as good as this! We love our new exhaust systems and want to offer them as bolt- in cat-backs to people who cannot get their car here for a custom installation. Below are pictures of the exhaust along with a sound clip. The exhaust we are selling as kits is the car on the left hand side. Nice deep tone, not overly loud. Personally I like the sound of this exhaust over the Stebro, and that says a lot because I REALLY like the Stebro exhaust.
http://i65.photobucket.com/albums/h2...X/DSCN2127.jpg http://i65.photobucket.com/albums/h2...X/DSCN2129.jpg http://i65.photobucket.com/albums/h2...X/DSCN2128.jpg http://i65.photobucket.com/albums/h2...X/DSCN2126.jpg The kit comes with new stainless hardware and a new gasket for the muffler flange. Also comes with new spring bolts, springs, gasket, and nuts for the cat flange. The system is guaranteed to bolt into ANY SVX. Due to some states emissions regulations we cannot guarantee that it will pass inspection. Please contact your state's motor vehicle department to inquire about regulation standards. Kits will cost $900+ Shipping. We will ship anywhere in the continental US, if you are outside of this range, please contact us about shipping. Link on how to order is HERE |
Re: AWD's Bolt-in Cat-back Exhaust
YT,
Given that it's a "cat back" system, there shouldn't be any reason why the system would negatively impact a car's emissions (i.e., the three stock cats will all still be in place). I could see your point if you were offering the system with the 2-into-1 magnaflow cat to replace the stock main cat.... -Bill |
Re: AWD's Bolt-in Cat-back Exhaust
Quote:
Tom |
Re: AWD's Bolt-in Cat-back Exhaust
Quote:
I guess anything is possible at the state level. I just don't see how replacing mufflers alone could get crosswise with any laws other than dB-related ones. Based on your video clip, I really don't see that being possible with your system. -Bill |
Re: AWD's Bolt-in Cat-back Exhaust
Quote:
Tom |
Re: AWD's Bolt-in Cat-back Exhaust
Quote:
-Bill |
Re: AWD's Bolt-in Cat-back Exhaust
Tom,
Have you ever tried this setup without the center resonator and just the Bullet in the rear? |
Re: AWD's Bolt-in Cat-back Exhaust
Quote:
Tom |
Re: AWD's Bolt-in Cat-back Exhaust
Looks beautiful Tom! Hope you sell a good deal of them for the hard work you put into it.
|
Re: AWD's Bolt-in Cat-back Exhaust
So what are the chances on getting let in on the secret of which Bullet muffler model this is?
|
Re: AWD's Bolt-in Cat-back Exhaust
Quote:
Tom |
Re: AWD's Bolt-in Cat-back Exhaust
i think that your one tom sounds better than the stebro its like its more of a pronounced sound throughout the rev range rather than drowning itself out half way through .i wish i had $$$$ to buy one :D:p
|
Re: AWD's Bolt-in Cat-back Exhaust
Impressions of this System:
My daily driver is the Ebony pictured, running the first of these kits built. I have since put roughly 300 miles on the setup. The subtle mumur of the car at idle combined with the bold tones at speed make this one of the best exhaust systems I have heard on the SVX! I just came back from a short trip on the parkway, windows down, and I am grinning ear to ear.:D |
Re: AWD's Bolt-in Cat-back Exhaust
Dyno numbers maybe? Or how about weight savings? The stock system is wicked heavy....
Yes, I am from New England and yes, I did just say "wicked"... |
Re: AWD's Bolt-in Cat-back Exhaust
Quote:
I will be running my car on the dyno if we can get enough people together for a decent dyno day.:) |
All times are GMT -6. The time now is 07:38 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122