The Subaru SVX World Network

The Subaru SVX World Network (https://www.subaru-svx.net/forum/index.php)
-   Technical Q & A (https://www.subaru-svx.net/forum/forumdisplay.php?f=5)
-   -   Torque specs for rear converter (https://www.subaru-svx.net/forum/showthread.php?t=4651)

dart 06-24-2002 05:48 PM

Torque specs for rear converter
 
Hey and howdy,

Any kind soul with a service manual I'm seeking the torque specs for the rear cat converter for a '92 SVX. 4 special bolts w/springs on them. #15 shown here at Subaruparts.com:

http://www.subaruparts.com/diag/?mod...category=440-A

Thanks in advance for any replies.. :)

wawazat?? 06-24-2002 08:17 PM

Per the SVX bible
 
9-17 ft-lb.

Good luck with your repair.

Todd

svx_commuter 06-25-2002 05:50 AM

When you torque them bolts, make sure the nut bottoms out on the shoulder of the bolt. The springs are a lot stronger when they are new.:)

dart 06-25-2002 10:45 AM

Re: Per the SVX bible
 
Thanks guys:D


All times are GMT -6. The time now is 02:45 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122