HID installation query
 

Noticed our 9006 connectors (lows) are always "hot" with light switch OFF..apparently turning the switch supplies a ground so they light up. Seems like aftermarket HID setups might not synch with these connectors or am I wrong here ?

Re: HID installation query
 

You flip the connector on a typical HID kit- I have had HID kits on 3 SVXi. One Lavalux from OT (the best) which was made for the SVX, the other two were DDM Apex, worked ok after flipping connector.

Re: HID installation query
 

Thanks..could you describe what you mean by "flipping" the connector ? Does it involve moving wires from their connector sites ?

Re: HID installation query
 

most of those kits come with a connector that is reversible, no rewiring needed you just put the red wire side of the connector in so it is in the - side. I will take a quick pic and show you.

http://localserver.no-ip.biz/Public/...%20%281%29.JPG

http://localserver.no-ip.biz/Public/...%20%282%29.JPG

Re: HID installation query
 

Thanks for the pic..will get a DDM set so I know things will go smoothly.