The Subaru SVX World Network

The Subaru SVX World Network (https://www.subaru-svx.net/forum/index.php)
-   General SVX Babble (https://www.subaru-svx.net/forum/forumdisplay.php?f=2)
-   -   Wheel mounting studs (https://www.subaru-svx.net/forum/showthread.php?t=16460)

LarryIII 02-16-2004 05:37 AM

Wheel mounting studs
 
Can someone post the diameter of the circle circumscribed by the five wheel mounting bolt holes?

Thanks.

NapaBavarian 02-16-2004 10:22 AM

If you're looking for the bolt circle it's 5 on 100mm, very small, my VW Vanafon is 5 on 112.5mm and my BMWs are 5 on 115mm, older smaller bmws were 4 on 100mm. This is the diameter of the circle formed by the center points of the studs, not the outside.

wawazat?? 02-16-2004 10:31 AM

Sorry that's incorrect
 
ALL OTHER Subarus use 5x100mm BCP. The SVX is unique (yeah, like we didn't already know that) in that it uses 5x114.3mm (or 4.5" for us Yanks :)).

I repeat, 5x114.3mm.

Todd

SVXRide 02-16-2004 10:34 AM

The SVX bolt circle is 5x114.3mm, also quoted as 5x4.5in.
Do a search of this site on "Rims" to confirm this info (I think Todd had a good post that had everything you'd want to know about rims for the SVX.)
-Bill


All times are GMT -6. The time now is 01:00 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122