trouble with new SVX remote
I just purchased a NOS oem svx keyless entry remote....
The original battery inside was a bit corroded, but not to bad. I replaced it. Tried to do the programming but it has not worked... I can get the car into programming mode easily, but when I press the remote 4 times it doesn't seem to have any affect on the car. |
Re: trouble with new SVX remote
1 Attachment(s)
Once in programming mode, the parking lights should flash with each press of the button. They illuminate when the button is pressed and goes out when the button is released.
A total of four times http://www.subaru-svx.net/forum/atta...1&d=1494948036 . |
Re: trouble with new SVX remote
A total of four times...?...for 2 remotes ? Instructions suggest press 2 times when in programming mode per remote, right ?
THX |
Re: trouble with new SVX remote
That's how I read that too. Not totally sure though. I need to try this.
I just got this SVX a few months ago and it came with a (very worn) remote. I put a new A23 battery in it but got nothing. Didn't know about this programming bit though. The car also came with a couple of generic remotes too - I wonder if it'll work on those? |
All times are GMT -6. The time now is 03:14 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122