kwren |
05-26-2008 12:56 AM |
If it is the return hose...
Quote:
Originally Posted by Davestone
(Post 548958)
The leak seems to be coming from a hose on the left side of the pump. I didn't look too long, but how hard is it to replace that hose? Is there a write up or is it straight forward.. Sorry I'm still learning about engine stuff so be as simple as possible please
|
it would be fastened on with a hose clamp and you can easily just look at it and see where the other end goes:confused:
Should be pretty easy to look and see where the fluid is coming from.
was it leaking before you replaced the "O" ring?
Keith
|