The Subaru SVX World Network
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

The Subaru SVX World Network (https://www.subaru-svx.net/forum/index.php)
-   SVX Parts For Sale (https://www.subaru-svx.net/forum/forumdisplay.php?f=41)
-   -   Selling some spare parts (https://www.subaru-svx.net/forum/showthread.php?t=61387)

alcyonesvx92 05-07-2013 07:13 AM
Re: Selling some spare parts
 
I need both Pearly doors :( Too tough to send something like that by shipping huh? I wonder what shipping would even be for something like that. I live in MN.

SVX8588 05-07-2013 08:49 PM
Re: Selling some spare parts
 
Quote:
Originally Posted by alcyonesvx92 (Post 723841)
I need both Pearly doors :( Too tough to send something like that by shipping huh? I wonder what shipping would even be for something like that. I live in MN.
Wow that would cost a lot. Besides that the main reason I bought the parts car was for the doors.

subaruster 05-22-2013 08:48 AM
Re: Selling some spare parts
 
Hey i need the tiny light bulbs (3 or 4) that's inside the cruise/hazard pods.

1986nate 05-22-2013 10:07 AM
Re: Selling some spare parts
 
Quote:
Originally Posted by subaruster (Post 724490)
Hey i need the tiny light bulbs (3 or 4) that's inside the cruise/hazard pods.
Just get new ones

SVX8588 05-22-2013 08:41 PM
Re: Selling some spare parts
 
Quote:
Originally Posted by subaruster (Post 724490)
Hey i need the tiny light bulbs (3 or 4) that's inside the cruise/hazard pods.
Quote:
Originally Posted by 1986nate (Post 724493)
Just get new ones
What he said ^

I have actually cannibalized almost all the bulbs from the parts car.
I would suggest these for replacement bulbs. They require slight modification to fit in some places, but work great:

http://www.superbrightleds.com/morei...panel-led/220/

fasteract7 05-26-2013 05:24 AM
Re: Selling some spare parts
 
"I would suggest these for replacement bulbs. They require slight modification to fit in some places"

...what kind of modification is needed ?...the things are so small to begin with i can't see being able to mess with them much.

SVX8588 05-26-2013 05:47 AM
Re: Selling some spare parts
 
Quote:
Originally Posted by fasteract7 (Post 724631)
"I would suggest these for replacement bulbs. They require slight modification to fit in some places"

...what kind of modification is needed ?...the things are so small to begin with i can't see being able to mess with them much.
Depending on which switch they are installed in, they may need to be shortened. I just used a small flat file and took a mm or two off the end. Also, for some I had to remove a small bit of plastic from the twist lock tabs to allow the bulb to slide straight into the socket before twisting.

fasteract7 05-26-2013 01:50 PM
Re: Selling some spare parts
 
Quote:
Originally Posted by SVX8588 (Post 724633)
Depending on which switch they are installed in, they may need to be shortened. I just used a small flat file and took a mm or two off the end. Also, for some I had to remove a small bit of plastic from the twist lock tabs to allow the bulb to slide straight into the socket before twisting.
Much appreciate the clarification..do you recall if our bulb size is the 3 or 4mm listed in the link?

SVXyGirl 05-26-2013 04:04 PM
Re: Selling some spare parts
 
Quote:
Originally Posted by SVX8588 (Post 723869)
Wow that would cost a lot. Besides that the main reason I bought the parts car was for the doors.
Check Greyhound (the bus company). I shipped a hood from MD to TX for a reasonable price.

SVX8588 05-26-2013 07:40 PM
Re: Selling some spare parts
 
Quote:
Originally Posted by fasteract7 (Post 724645)
Much appreciate the clarification..do you recall if our bulb size is the 3 or 4mm listed in the link?
No problem. 3 mm

SVX8588 05-26-2013 07:50 PM
Re: Selling some spare parts
 
Quote:
Originally Posted by SVXyGirl (Post 724649)
Check Greyhound (the bus company). I shipped a hood from MD to TX for a reasonable price.
I'm actually keeping the doors because mine are rusted out.
Besides the nearest greyhound station is probably in another state...

fasteract7 05-27-2013 07:43 PM
Re: Selling some spare parts
 
1 Attachment(s)
Quote:
Originally Posted by SVX8588 (Post 724653)
No problem. 3 mm
Thanks once gain...attached a photo of my 2nd SVX. Just finished rust converting the suspension parts this weekend.


All times are GMT -6. The time now is 09:28 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122