The Subaru SVX World Network

The Subaru SVX World Network (https://www.subaru-svx.net/forum/index.php)
-   General SVX Babble (https://www.subaru-svx.net/forum/forumdisplay.php?f=2)
-   -   SVX Mechanic around northeast PA needed (https://www.subaru-svx.net/forum/showthread.php?t=35551)

dizzan 10-09-2006 11:47 AM

SVX Mechanic around northeast PA needed
 
I'm in need of some work on my 96 LSi. It's been sitting for a while now, and has some (hopefully) minor work needed to become road ready.
I'm looking for a good SVX mechanic around NE PA. Does anyone have any recommendations?
Currently there's what I think is a cracked CV so I'm going to need to tow it to it's destination... so the closer to Wilkes-barre, PA the better :)

Thanks,
Dan

TomsSVX 10-10-2006 05:02 PM

I can always give a hand but I rarely have much time so scheduling is key.

Tom

SVXBart 10-10-2006 05:17 PM

try e-mail svxpert at subarueast@yahoo.com
he is across the river from philly
he worked on my car,and he is not expensive as dealer.

Mike621 10-10-2006 05:26 PM

Quote:

Originally Posted by TomsSVX
I can always give a hand but I rarely have much time so scheduling is key.

Tom

+1 I would call on Tom. He is a book of knowledge when it comes to mechanical know-how on these cars. He has done a great deal of work on mine and my friends' SVXs.

dannmarr 10-10-2006 05:43 PM

Try Nielson's garage. His name is Carl. He tows and does most of the work himself and he is not expensive. A really nice guy. He's off of 115 near Wilkes Barre, (570) 825-5883. Tell him another SVX owner recommended him to you.

dizzan 10-10-2006 09:04 PM

Quote:

Originally Posted by TomsSVX
I can always give a hand but I rarely have much time so scheduling is key.

Tom

Hey Tom... Thanks for the offer. Where are you located? I'm in no huge rush, although I'd like to get her running for winter. I have my daily driver Accord as well as my truck, so luckily I can afford for it to take a while for things to be done right... I just want to find someone who knows the cars and has reasonable labor rates. Feel free to PM me if you're interested... but it's no problem if you don't have the time.

Thanks,
Dan

TomsSVX 10-10-2006 11:07 PM

well depends on what your problems are. If it is just an axle I can come there and do it

Tom


All times are GMT -6. The time now is 10:32 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122